Dirt in pipelines, problems with hygiene, reduced cooling capacity, unplanned downtimes, production standstills.

Do you have these problems at your plant?

WE CLEAN YOUR PIPELINES AND SYSTEMS!

Signifier

Welcome to comprex® engineering

We clean your pipelines - with air and water

Recurring problems with clogged cooling circuits and product lines, contaminated water systems, sludged waste water pressure lines – do you experience such or similar problems time and again? Regardless of whether you are in an industrial or supply and disposal company – each application is individual and yet similar – and: we at comprex® have years of experience with all these cases!

01

comprex® Impulse

comprex® entfernt Ablagerungen durch gezielte
Steuerung von Druckluft und Wasser

02

Bögen & Formstücke

comprex® Impulse passen sich flexibel an Richtungsänderungen der Rohrleitung an

03

Variable Nennweiten

comprex® eignet sich für Rohrdurchmesser zwischen 1 mm und 1.200 mm

04

Nennweitenwechsel

Im Gegensatz zu Molchverfahren strömen die comprex® Impulse leicht durch
Querschnittsänderungen im Rohrleitungssystem – ohne stecken zu bleiben

05

Steigleitungen

comprex® Impulse reinigen auch über mehrere Ebenen hinweg mit gleichbleibender Wirksamkeit

06

Verzweigte Systeme

Das gesamte Rohrleitungssystem wird abschnittsweise mit comprex® gereinigt

07

Armaturen

Die comprex® Impulse durchströmen spielend im System vorhandene Armaturen
und reinigen auch Toträume – dort wo andere Verfahren nicht hinkommen

01

comprex® Impulses

comprex® removes deposits through targeted control of compressed air and water

02

Bends & Fittings

comprex® impulses adapt flexibly to changes in the changes in the direction of the pipeline

03

Variable Nominal widths

comprex® is suitable for pipe diameters between 1 mm and 1,200 mm

04

Nominal width change

In contrast to pigging processes, the comprex® impulses flow easily through changes in cross-section in the piping system – without getting stuck

05

Risers

comprex® Impulse also clean over several levels with consistent effectiveness

06

Branched Systems

The entire piping system is cleaned cleaned with comprex® in sections

07

Fittings

The comprex® impulses easily flow through through existing fittings in the system and also clean dead spaces – where other where other processes cannot reach

We comprex your pipelines!

comprex® cleaning process

Simple, but effective:

We use our patented comprex® impulse flushing technique to clean your system. We thus offer you an effective, seamless cleaning solution that minimises time, effort and costs and is available both as a preventive measure and in case of current need.

 

We clean piping systems of all kinds:

Product lines, cooling and tempering circuits, heat exchangers, equipment components, cooling lubricant lines, drinking water distribution networks, waste water pressure lines, etc.

 

comprex® removes deposits of varying degrees of hardness:

Whether loose sediments, freshly deposited dirt, germs such as legionella or even strongly adherent dirt – comprex® technology cleans with the power of mechanics. Whether sludge, paint or food – the goal is to get your pipes clean again and keep them clean in the long term. Regular cleaning of your equipment contributes to efficient, hygienic production.

 
How does it work?

In contrast to conventional water flushing, we use targeted impulses of compressed air and water. Our process therefore works purely mechanically without aggressive chemicals and still achieves the desired cleaning effect.

 

Our cleaning units are connected to the flushing section to be cleaned. From there, filtered compressed air is injected into the pipe in a controlled and pulsed manner. Inside the pipe – with the water remaining there – packages of air and water blocks are created which flow through the pipe section at high speed (up to 20 m/s).

 

These packages generate enormous turbulence with strong shearing and dragging forces that mobilise the deposits on the pipe walls and reliably discharge them.

 

The result: clean pipes and clean product – efficient, gentle and economical.

 

The advantages at a glance

Powerful

FLEXIBle

Scalable

Chemical-Free

Water-Saving

Disassembly-free

Powerful
Flexible
scalable
chemical-free
water-saving
disassembly-free

comprex® in comparison with conventional water flushing

Water flushing
comprex® process
Comprex weniger Wasserverbrauch

The powerful cleaning pulses of air and water are not only effective, but also use up to 90% less water than water flushing.

Comprex hohe Geschwindigkeit

The comprex® impulses reach a speed of up to 70 km/h in the pipe. In comparison, water flushing only manages 10 km/h with great difficulty.

70 km/h = 20 m/s
10 km/h = 3 m/s 

Comprex hohe Kraft

The ability of comprex® to remove deposits is 10 to 100 times stronger than that of water flushing. The cleaning is nevertheless harmless to the pipelines, as the pressure remains below the system pressure.

What distinguishes our cleaning technology?

With our comprex® process, we offer an effective, sustainable and resource-saving cleaning alternative.

We clean where no other process can reach!

Let us advise you and we will be happy to convince you with a test cleaning at your premises.
+49 6341 38084-75
info@hammann-engineering.de

Or simply use our contact form.

01

Stationary Units

SCU – Stationary modules
SCU – Mobile modules

02

Mobile Units

MCU – 20 MCU – 300
MCU – 3300

We provide the right unit for every requirement.

Use our comprex® units to specifically clean your pipelines or production facilities. We integrate our cleaning technology as an automated step in your operating processes. In this way, you can permanently prevent recurring contamination.

01

Stationary Module

SCU – Standing Module
SCU – Wall Module

02

Mobile Module

MCU – 20 MCU – 300
MCU – 3300

We provide the right equipment for every request.

Clean your pipelines or production facilities in a targeted manner with our comprex® units. We integrate our cleaning technology as an automated step in your operating processes. In this way, you permanently prevent recurring contamination.

Would you like to benefit from our comprex® process?

Choose from these options.

From test cleaning to integrated comprex® systems – we will work out the right solution for your problem!

Service

Plant construction

For one-off to repetitive applications.

Restore the efficiency of pipelines and remove deposits and germs.

For regular applications

Ensuring consistent efficiency of pipelines and systems and eleminates deposits and germs constantly.

System-integrated cleaning offers you these advantages:

Short downtimes

Increased process reliability

Increased efficiency of pipelines

Permanent cost savings 

Service

For one-off to repetitive applications.

Restore the efficiency of pipelines and remove deposits and germs.

Plant construction

For regular applications

Ensuring consistent efficiency of pipelines and systems and eleminates deposits and germs constantly.

System-integrated cleaning offers you these advantages:

Short downtimes

Increased process reliability

Increased efficiency of pipelines

Permanent cost savings 

Berechnen Sie jetzt Ihre Ersparnisse mit einer integrierten comprex® Anlage für automatisierte Reinigungsvorgänge. 

Our plants are specifically customized for the needs of our clients

These are our areas of application.

In these areas of application, we provide solutions with comprex® engineering for continuous cleaning of your systems to efficiently prevent deposits and contamination in the long term.  

We are specialised in these applications:

Pipelines

Product lines

Cooling and Temperature Control Systems

Machine Cooling

Cooling Lubricant

Heat exchangers

We offer solutions across all industries: 

Paints & Lacquers

Automotive

Plastics processing

Metal processing

Chemistry

Pharmaceuticals

Food

Raw materials

Our system is optimally suited for these processes: 

CIP

SIP

We are specialised in these applications

Waste water pressure lines

Heat exchangers

Sewage treatment plants

Drinking water pipelines

Raw water pipelines

Well pipelines

Our plants are suitable for this:

Water suppliers

Service partner

Can’t find what you’re looking for here? We are open to new innovations and also offer special solutions for each area that are optimally adapted to your requirements. Please contact us!

The before and after effect

Stationary integration of our comprex® units

The stationary comprex® unit SCU operates fully integrated and automated. Our comprex® software is integrated by our experts into the customer's plant control system as an integral part of the production operation.
The process is adapted to the respective application and does not require any manual user input at the SCU to carry out the cleaning. Cleaning programmes optimised for the respective production plant are stored in a software database and ensure reproducible cleaning results.

comprex®

Competence Centre for Mechanical Cleaning

0
Years of experience
0
Employees
0
Locations

The focus and heart of our business is the patented comprex® impulse rinsing process, which we have developed and which we are constantly redefining and expanding in various performance levels. This enables us to adapt it perfectly to the individual, changing tasks of our customers. As a service provider for the cleaning of fluid-carrying systems and as a manufacturer of mobile and stationary cleaning systems, we have been active in various areas and sectors of drinking water supply and industry for 1997.

Cooperation partners and customers

Co-operations

Clients

Customer testimonials